Moto STA App Kit 12v
- 1pc XKchrome BLE 4.0 app controller. Click here for detailed app instructions.
- 8pcs compact pods with mounting brackets.
- 4pcs slim strips.
- ON/OFF switch wire.
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other motorcycle LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
Be Seen. Be Safe
Brake light visibility is the top concern for motorcycle safety at night. Now with the integrated Smart Brake sensor wire, XKchrome can turn the entire motorcycle body into a brake light! As soon as you apply the brake, XKchrome immediately switches all LED lights on in red. This significantly increases the bike's visibility, and promotes faster reaction of the vehicle behind.
Music is the essence of life; and we make it the essence of light. XKchrome's Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it's a country music or a hard rock, just lay back and enjoy the full spectrum you defined for your favorite song.
With XKchrome's realtime "chameleon" feature, you can paint your ride with any color you see. Whether it's a bright shirt or a stunning paint job, just point your phone's camera to it. XKchrome instantly turns your vehicle into the very same eye-catching color, without even a finger tap. Be prepared to be in AWE!
Our color designer hand-picked over 15 themes for special occasions throughout the year. It even comes with an "emergency pattern" in case you parked at the side of the road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
XKchrome can do more than lighting. Thanks to its built-in Bluetooth Smart Beacon, XKchrome helps locate your parked vehicle. When you walk away after parking, XKchrome app will automatically pin down your location. So that you can easily look it up in the app when you need to find the way back. Once you get close enough, you can also turn on the lights to single your vehicle out from the endless parking row.
At XKGLOW, we never stop pushing the boundaries. With the latest app update, XKchrome can seamlessly transit lights from one color to another and tune light brighter as you move faster, turning your vehicle into a beast that breaths light! All these new features are updated for free so you can get the most out of XKchrome with your imagination.
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system. Check if your phone is BLE equipped >>
- Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 0.05A per pod; 0.1A per 10" strip.
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4" x 2.33 x 0.73" (100 x 60 x 19cm)
- Applications: Universal for all motorcycles, ATV, snowmobiles with 12V DC.
Turn Signal Upgrade Module Features:
- Turn signal: When the yellow sensor wire is activated by turn signal, the lights connected to the module will blink with turn signals, with or without the accent lighting being turned on.
- White light: when the white sensor wire is activated, the connected lights will change to solid white. The white wire can be attached to various signal sources such as headlight, reverse light, or door courtesy light for different purposes.
- 60w power amplifier: Even if the yellow and white wires are not used or activated, the module can serve as power amplifier. The lights will get main power from the red & black wires of the module and only draw a small amount of power from XKchrome controller as control signal, which enables larger scale installation that exceeds the 72w output of XKchrome controller.
*** Select "Add 2 turn signal modules" above ADD TO CART button to add to order.